Danger Asbestos Not Disturb Report Accidental Damage — ISO 7010 Compliant | PROFILESIGNS.CO
$ 3.55
- About this BS EN ISO 7010 compliant safety signDanger Asbestos Not Disturb Report Accidental Damage is a UK workplace safety sign manufactured to BS EN ISO 7010:2020 — the British and European standard for safety signs that satisfies the Health and Safety (Safety Signs and Signals) Regulations 1996.ISO 7010 safety signs use standardised symbols that workers, contractors and visitors recognise instantly regardless of language background, supporting safe behaviour and reducing accident risk in the workplace.Compliance & StandardsThis sign conforms to BS EN ISO 7010:2020, the recognised UK standard for safety signs published by the British Standards Institution. It meets the requirements of the Health and Safety (Safety Signs and Signals) Regulations 1996 (SI 1996/341) and supports compliance with the Health and Safety at Work etc. Act 1974. The Health and Safety Executive (HSE) Approved Code of Practice L64 provides further guidance on safety sign positioning, sizing and lighting. Failure to display appropriate safety signs where required can result in HSE enforcement action including improvement notices, prohibition notices and prosecution.Common Use CasesIn workplaces and offices, displayed at the point of hazard to alert staff and visitorsOn construction sites, positioned at gate entries and around active works under CDM 2015 principal contractor dutiesIn factories and warehouses, supporting risk assessments and safe-system-of-work proceduresIn schools, hospitals and public buildings, meeting the responsible person’s duty under workplace safety regulationsOn fleet vehicles and depots, integrated into vehicle safety procedures and yard traffic plansHow to InstallPrepare the surface. For self-adhesive vinyl, the mounting surface should be clean, dry and free of grease or dust, ideally above 10°C. For rigid PVC and 3mm Composite Aluminium, identify a suitable wall, post or panel location at the appropriate viewing height.Position and secure. Self-adhesive vinyl peels and applies in a single pass — the Bubble-Free air-release adhesive minimises trapped bubbles even on the first attempt. Rigid panels can be mounted with screws (pilot-drilled holes), industrial bonding tape or panel clips depending on the substrate.Verify visibility. Step back and confirm the sign is readable at the typical approach distance for the location. Adjust positioning if required.SpecificationsMaterials: Bubble-Free Self-Adhesive Vinyl, 1mm Rigid PVC, 3mm Composite Aluminium, plus Self-Adhesive and Rigid Photoluminescent options on emergency-route signsManufacture: Made in-house in Merseyside, United KingdomWarranty: 5-year manufacturer warranty against fading, cracking and delamination under normal useDelivery: Free UK delivery on every order; standard dispatch 1–2 working days; bulk dispatch 3–5 working days for 50–199 unitsTrade pricing: 10% off at 10 units, 15% off at 20 , 20% off at 30 , bespoke quote for orders of 50 or more — applied automatically at checkoutPayment terms: Standard payment at checkout; Net 30 terms available subject to credit check; VAT-invoicing standard on all ordersBespoke service: Custom sizes, custom wording and bespoke branding available on request from our Merseyside workshopFrequently Asked QuestionsIs this sign legally required in UK workplaces?Where a residual workplace risk cannot be eliminated through other means, the Health and Safety (Safety Signs and Signals) Regulations 1996 require employers to display appropriate safety signage. BS EN ISO 7010:2020 is the current recognised standard. The HSE may issue improvement notices or prohibition notices where required signage is missing.What is BS EN ISO 7010?BS EN ISO 7010 is the British and European Standard for safety signs that uses internationally recognised symbols and colour codes. It is the current UK standard, having superseded the older BS 5499 system. The 2020 edition is the most recent revision.What size sign do I need for my workplace?Sign size is driven by viewing distance. As a guide, the BS EN ISO 7010 recommendation is that the pictogram height should be at least one one-hundredth of the maximum viewing distance. For most office and factory floor applications, A4 (300×200mm) or A3 (400×300mm) is appropriate; larger sites benefit from A2 (600×400mm) signage. Contact us on 07585 447765 if you need help sizing for a specific location.Do you offer bulk discount for trade buyers?Yes. Trade pricing applies automatically at checkout: 10% off at 10 units, 15% off at 20 units, 20% off at 30 units, and a bespoke quote for orders of 50 or more. No trade account setup is required. Net 30 payment terms are available subject to credit check.How fast is your UK delivery?Standard orders dispatch within 1–2 working days with free UK delivery on every order, regardless of order value. Bulk orders of 50–199 units typically dispatch within 3–5 working days. For 200 units, contact us and we will confirm a lead time within one working day.Can you make a bespoke version of this sign?Yes. PROFILESIGNS.CO manufactures bespoke safety signage in-house in Merseyside, with custom sizes, custom wording and bespoke branding available. Email [email protected] or call 07585 447765 to discuss your requirements — most custom quotes are returned within one working day.Order from PROFILESIGNS.CONeed bulk pricing for a multi-site rollout? Tiered trade discounts apply automatically at checkout, with bespoke quoting for orders of 50 or more units. For specialist requirements, custom wording or branded site boards, request a quote and our team will respond within one working day. For technical advice on size, material or compliance, call 07585 447765 or email [email protected].
Related Products
-
Warning Heavy Plant and Machinery Operate Site — ISO 7010 Compliant | PROFILESIGNS.COSelect options
This product has multiple variants. The options may be chosen on the product page
